The equipment can be operated as power source to simulate the over-voltage/current as it is occurred in the system.
This equipment is mainly used for SPD TOV test caused by the failure in voltage system. It can be also used in other scientific research.
IEC61643.11-2011, GB18802.1-2011, other national
standards and customer specified
AC TOV Test System
for Guangdong Mig Technology Co.,Ltd
Advantages and Features
(1)Equipped with computers to set the test parameters through the software interface, test automatically
(2)Automatically draw the curve and save the pictures as BMP format, edit the lab report conveniently.
(3)Record test time, test current, test voltage automatically and the data can be saved.
(4)Display real-time data of current and voltage through computer interface
(5)Emergency protection button
(6)Power supply cut off automatically in case of over-current
(7)Double protection from both over-current and relay
(8)The alarming of the power supply fault
(9)The L－N，N－PE，L-PE voltage and current can be measured optionally
(10)Installation: Cabinet installation with two cabinets.
Power supply: AC 3P+N, 400V, 50Hz/60Hz Impulse power transformer:
Output voltage/current can be designed as required Operation time: from ms to s as customer required Power capability: 5 times more than the stable rated power
Dry/Oil insulation type Impedance bank:
Resistors: changed from mΩ to tens Ω to adjust current.
Inductance: changed from mΩ to tens Ω to adjust current from 50kA to Amperes
Power factor: cosΦ from 0.1~0.95